← All layouts

Kato Unitrack · N scale · 29 pieces

Double Oval + Crossover — Kato Unitrack N scale plan

Two concentric mains linked by a double crossover.

Double Oval + Crossover: two concentric mains on the 33 mm center, linked by a double crossover. Double Oval + Crossover: two concentric mains on the 33 mm center, linked by a double crossover.
Double Oval + CrossoverDouble mainline · 33 mm
Board
1,676 × 914 mm
66 × 36 in
Track footprint
1,502 × 696 mm
59.1 × 27.4 in, centerline
Pieces
29
1 double crossover
Geometry
Closed
0 open ends

What it teaches

Two concentric ovals 33 mm apart, sharing a double crossover (20-210) on the near straight. The outer curves are R348-45 and the inner R315-45: 348 − 33 = 315, so both sets of curves share a center and the loops stay a constant 33 mm apart all the way round. The crossover's two mains are on exactly that spacing, which is what lets it bridge them.

Each loop's straights are 806 mm — the 310 mm crossover plus 2 × S248 on the near side, 3 × S248 + S62 on the far side — so each oval closes independently and the crossover simply joins them. The crossover is about half the price of the whole plan.

Why R348 outside R315 stays concentric →

Parts list

Grouped by the Kato part number you actually buy — a curve's left and right hands are one part. Quantities, pack sizes and prices are the ones RailMind's parts list computes for this plan.

Kato partPieceQtyEachSold asBuyCost
20-000S24810$2.504-pack3 packs (12 pcs, 2 spare)$30.00
20-040S622$1.754-pack1 pack (4 pcs, 2 spare)$7.00
20-120R315-458$2.504-pack2 packs (8 pcs)$20.00
20-132R348-458$2.754-pack2 packs (8 pcs)$22.00
20-210Double Crossover1$75.00single1$75.00
Estimated total, per piece$145.50
Buying whole packs — 8 packs + 1 piece$154.00

Approximate US retail per piece — Kato sells most track in packs, and street prices vary. Use as a planning estimate. The per-piece total is what the pieces cost; the whole-pack total is what you pay at the counter when a pack leaves spares.

Build it

RailMind ships this plan in its example gallery. Open it, edit it, and print it at true size — tiled across Letter or A4 with registration marks — to lay the track over. The parts list above is the one it produces, and it will check it against the track you already own.

iPad only · iPadOS 18 or later · free to build a starter layout, one US$29.99 purchase to unlock every piece.

← Oval + Passing SidingFigure-8 →